Two pieces of jewellery can look identical in a photo and feel completely different in your hand. The difference is in the details: how securely a stone is held, how smoothly a clasp closes, whether a prong catches on your dupatta. At Raisoni Jauharis, every piece is checked before it leaves us.
This guide shares the 12 checks we believe every fine piece of jewellery should pass, why each one matters, and how you can do a quick version yourself at home. Use it to judge any jeweller, including us.
Key takeaways
- Quality covers four areas, the diamond, the setting, the metal, and function and comfort.
- Loose stones are the most common reason jewellery needs repair, so stone security comes first.
- A hallmark confirms gold purity but not craftsmanship.
- A simple 2-minute unboxing check can catch most problems early.
- Regular check-ups every 6 to 12 months keep daily-wear pieces safe.
Why quality checks matter
Photos cannot show everything
Product photos show design and sparkle, but not how firmly a stone is held, how smooth the inside of a ring feels, or whether a clasp will hold under strain. These are the details that decide how long a piece lasts.
Small flaws become big problems
A slightly raised prong can snag clothing and gradually loosen. A weak clasp can open without warning. A rough inner edge can irritate skin. Catching these before delivery protects both the customer and the piece.
Diamond checks
1 Origin matches the disclosure
Every diamond should be clearly identified as lab grown on the product page, invoice and report. India's BIS standard IS 19469:2025 requires clear disclosure of laboratory-grown diamonds.
2 Report matches the stone
Where a stone carries an IGI or HRD Antwerp report, the report details, and the laser inscription where present, should match the stone in the piece.
3 Stones are clean and evenly matched
In multi-stone pieces such as tennis bracelets or halos, small diamonds should look consistent in colour and brightness, with no visibly darker, cloudy or chipped stone.
Setting checks
4 Every stone is secure
Stones should not move or rattle when the piece is gently tapped near the ear. Loose stones are one of the most common reasons jewellery comes back for repair.
5 Prongs are even and smooth
Prongs should be similar in size, sit firmly over the stone and not catch on fabric. A simple test is to run the piece gently over a soft cloth. It should glide without snagging.
6 Stones sit level
Viewed from the side, the top facet of each stone, called the table, should be level rather than tilted. Tilted stones reflect light unevenly and look less lively.
Metal checks
7 Gold purity is hallmarked
Gold purity should match the invoice and, for mandatory grades, carry a BIS hallmark with a HUID you can verify on the BIS Care app. See our BIS hallmark guide.
8 No porosity or rough patches
Under magnification, metal surfaces should be smooth, without tiny pits from casting, file marks or rough edges, especially on the inside of a ring where it touches skin.
9 Even polish and plating
The finish should be uniform across the piece. White gold should have consistent rhodium plating with no yellowish patches.
Function and comfort checks
10 Clasps and locks work reliably
Bracelet and necklace clasps should open and close firmly, and earring backs should grip the post securely. Read why clasps, flexibility and balance matter.
11 Comfort and balance
- Rings should have a comfortable inner edge.
- Earrings should hang straight without tilting forward.
- Pendants should face the front.
- Bracelets should drape smoothly without kinking.
Our guide to comfortable diamond earrings covers this in detail.
12 Size and dimensions match the order
Ring size, chain length and bracelet length should match what was ordered.
The 12 checks at a glance
| # | Check | Area | Can you check it at home? |
|---|---|---|---|
| 1 | Origin matches disclosure | Diamond | Yes, read the invoice and report |
| 2 | Report matches stone | Diamond | Partly, compare report details |
| 3 | Stones evenly matched | Diamond | Yes, look in daylight |
| 4 | Stones secure | Setting | Yes, gentle tap test |
| 5 | Prongs smooth | Setting | Yes, cloth test |
| 6 | Stones level | Setting | Yes, side view |
| 7 | Hallmark verified | Metal | Yes, BIS Care app |
| 8 | No porosity | Metal | Partly, with a loupe |
| 9 | Even finish | Metal | Yes, look in daylight |
| 10 | Clasps work | Function | Yes, open and close |
| 11 | Comfort and balance | Function | Yes, wear it |
| 12 | Correct size | Function | Yes, measure |
Before it ships
After inspection, the piece is cleaned, packed securely with its documentation and dispatched. Orders typically deliver within 2 to 3 weeks, and shipping is free on orders above ₹49,999.
Your own 2-minute unboxing check
- Record a video while opening the parcel.
- Match the invoice, report and piece.
- Tap gently near your ear and listen for loose stones.
- Run it over a soft cloth to check for snagging.
- Verify the HUID in the BIS Care app.
- Try it on and check comfort and fit.
- Contact us immediately if anything looks wrong.
Keeping your jewellery in top condition
Everyday habits
- Put jewellery on after creams, perfume and makeup.
- Remove rings and bracelets for the gym, cooking and cleaning.
- Store pieces separately to avoid scratches. See how to store diamond jewellery.
Periodic check-ups
For pieces worn daily, a check of prongs, clasps and settings every 6 to 12 months is a good habit. Catching a raised prong early is far easier than replacing a lost stone.
Built to last
Careful checks are also why Raisoni Jauharis can stand behind every piece with lifetime buyback at 80 percent of the diamond value and up to 100 percent on gold, as per our current buyback policy. Learn how each piece is made in how Raisoni Jauharis makes its jewellery.
Explore pieces built to these standards
Frequently asked questions
What should I do if a stone feels loose?
Stop wearing the piece and contact us right away. Continuing to wear it risks losing the stone.
How often should I get my jewellery checked?
For pieces worn daily, a check of prongs and clasps every 6 to 12 months is a good habit.
Does a hallmark guarantee good craftsmanship?
No. A hallmark confirms gold purity only. Craftsmanship is judged by checks like stone security, finish and clasp function.
Why do white gold pieces sometimes look yellowish over time?
White gold is usually plated with rhodium, which can wear with time. Re-plating restores the bright white finish.
The bottom line
Fine jewellery should look beautiful on day one and still feel secure years later. These 12 checks are how that happens. Use them to judge any piece you buy, and expect every Raisoni Jauharis piece to meet them.
Want to see these checks in person? Visit our Jayanagar, Bengaluru showroom, call +91 99746 02511, or contact us.
